Brandt KD 46

8 MM
Brandt KD 46

Technical data

machineedge banding machine
typeKD 46
part Id-no.2240128
year of construction1998
work-piece width min.70
work-piece length min.160
height of work piece min-max10 - 50
edge thickness min. max.0,4 - 8
feed m/min.11
stop sideright
glue indicationglue roller
gluing aggregatehot melt glue
edge magazin roller3
edge magazin strips yes
edge magazin massive8
pressure zonestraight
chamfer / radius milling1
profile trimming / copying (2 motors)1
profile sliding blade bottom1
height adjustmentmanually
machine dimension 1
height 1650


year of construction: 1998
used single-sided Edge Banding Machine in right-hand execution
for hot-melt gluing BRANDT KD 46 euipped as follows:

Technical data:
edge thickness             0.4 - 8 mm
roll cutting max.          3 x 45 mm       or
                           0.8 x 60 mm
workpiece thickness        10 - 50 mm
workpiece width min.       70 mm
workpiece length min.      160 mm
feed max.                  11 m/min.
electrics                  400 V - 3 ph. - 50 Hz
pneumatic connection min.  7 bar
connected load approx.     7 kW

quick-changing gluing part for hot-melt glue.

Leakproof glue storage below glue rolelr, so the machine does not
become dirty

Fine dosage of glue onto the workpiece by glue roller,
no adjustment to workpiece thickness required.

Glue roller turning direction either in parallism or counter movement.
Glue temperature control by electronic thermostat.
Automatic glue temperature reduction in case of work interruptions.
infra-red hot-melt glue activation.

Automatic edge magazine for roll material and fix lengths,
incl. roll table diam. 800 mm.

Equipment with strengthened pre-cut saw for thick PVC/ABS max. 3 x 45 mm.

Standard equipment with panel-distance control which is indicated visually.

Heavy pressure zone with driven, pneumatic main pressure roller as well
as 2 fre-running post-pressure rollers.

Standard equipment with manual centralized greasing of the conveyor chain.

Centralized adjustment of the top pressure.

Integrated straight-line control for contact-free controlling of
processing functions.

Adjustable with the keyboard and LED-display.
Electrics with modular control system to make it more comfortable
for the operator.

Prepared for the installation of a workpiece reverse \\\"Bumerang\\\"
brand \\\"LIGMATECH\\\".

Standard equipment of units:

snipping unit chamfer/straight 2 x 0,27 kW
For the snipping of the front and back edge overhang with
pulling cut for high precision.
Edge dimensions: max. 8 x 40 mm
max. 3 x 50 mm
2 motorseach 0.35 kW, 200 Hz, 12000 rpm
swivelling range straight to chamfer cutting 0 - 15 degrees
Equipped with 2 cut saws diam. 100 x 35 x 2.6 mm
trimming unit 2 x 0.35 kW 0-25 degrees 200 Hz
For flush-trimming of upper and lower edge material overhang.
2 motors positioned next-to-each-other, tracing vertically and
horizontally, manual lateral movement by 30 mm, height adjustment
of the upper motor with the top pressure
digital counters for quick adjustment
Spindle adjustment for lateral tracing rollers.
edge thickness max. 8 mm
swivelling range 0 - 25 degrees
standard feeding with 2 WPL combined cutters radius/chamfer
diam. 56/50 x 16 x 16 mm, t = 4, r = 3 mm

form-trimming unit top and bottom, for the form-trimming
of top edges on post- and softforming parts and edge-rounding
of thick PVC-edges. Wood edges only partly possible, depending
on prior tests.
Use of chamfer or radius cutters possible (change device).
2 motors each 0.35 kW, 200 Hz, 12000 rpm.
edge thickness max. 3 mm (radius)
standard feeding with 2 WPL radius cutters r = 3 mm,
diam. 58/50 x 120 x 16 mm
t = 4

scrapping unit for PVC-edges
tracing from top, bottom and laterally, for the chamfering and rounding of
pretrimmed PVC-edges.
Edge thickness max. 3 mm. Equipped with 2 WPL-profile cutters r = 3 mm.

noise-protection incl. centralized suction nozzle diam. 120 mm

static. frequency convertor 200 Hz

Electronic motor braking for snipping and trimming units

environmental temperature allowed min. +5 degrees/max. +35 degrees Cels.

In case the mains voltage variation is more then +/- 10 %, a voltage
stabilisor has to be installed locally at customer\\\'s location.

Safety devices as per European\\\'s regulations 89/392/EWG, appendix I.

length      :              5000 mm
width       :              1300 mm
height      :              1650 mm
weight      :              1650 kgs