Brandt KD 56

- 3 mm
Brandt KD 56

Technical data

machineedge banding machine
typeKD 56
part Id-no.2241081
year of construction1997
work-piece width min.60
work-piece length min.140
height of work piece min-max8 - 40
edge thickness min. max.0,4 - 3
feed m/min.9
stop sideright
glue indicationglue roller
gluing aggregatehot melt glue
edge magazin roller3
edge magazin strips yes
edge magazin massive3
pressure zonestraight
chamfer / radius milling1
profile sliding blade bottom1
flat sliding blade top/bottom1
height adjustmentmanually
machine dimension 1
height 1400
siteat the customer site


Year of construction: 1997
ex location D-07545 Gera
without any warranty
Used Edge Banding Machine of BRANDT Type KD 56
equipped as follows:

Edge Banding machine Optimat KD 56

Single-sided edge banding machine in right-
hand execution for hot melt gluing.

Gluing unit for granulated hot melt glue.
Glue reservoir underneath the glue roller.
Glue application to the workpiece by means of
glue roller in synchronism and antirotation.
Electronic glue temperature adjustment.
Automatic reduction of glue temperature in
case of work interruptions.

Automatic edge magazine for coiled material and
fixed lengths, incl. coil cut-off and roller
plate, diam. 800 mm.

Pressure zone with pneumatically actuated
main pressure roller as well as special
post-pressure roller for condensation of the
top and bottom glue joint.

Centrally adjustable top pressure.
Central lubrication of chain track by hand.
Control panel at machine infeed.

End trimming unit for front and rear edge
overhang. Precise guidance by means of
linear guides.
2 motors 0,18 kW ea. 200 Hz, 12.000 U/min.
Drawing cut for a high degree of precision.
Swivelling range straight to chamfer 0-15
Equipped with 2 end trim saws diam.100x2,6x32mm
T = 30

Flush trimming unit top and bottom vertically
and horizontally sensing.
Swivelling range 0 - 15 degrees.
2 motors each 0,27 kW, 200 Hz, 12.000 rpm
equipped with 2 combined cutters radius/
straight diam. 56/50x16x16mm, T=4, r = 2 or

- 5730 - Scraping unit for PVC edgings
Sensing from top, bottom and lateral, for
chamfering and rounding off of previously
trimmed PVC-edgings. Edge thickness max. 3 mm,
profile knives r = 2 or 3 mm.

- 5455 - Buffing unit 2motors
For finishing the edges top and bottom,2 motors
0,09 kW each, individually suspended, lateral
and height adjustment. 2 molton wheels diam.
120 x 20 mm.

Workpiece support extensible to 350 mm.

Sound protection hood incl. central extraction
diam. 100 mm.

Electric equipment with a modular control
system for easy service.

Admitted temperature tolerance min. + 5 degrees
max. + 35 degrees C.

In case of main voltage fluctuations of more
than +/- 10%, a voltage stabilizer must be
installed at customer\\\'s site.

Those machines, which are built for E.C. member
countries, are built acc. to EU safety
regulations 89/392/EWG.

Workpiece thickness             8  -  40 mm
Workpiece width min.                  60 mm
Workpiece length min.                140 mm
Edge thickness:
fixed lengths  0,4 - 3,0 mm (max. 3 x 45 mm)
coil cut-off   0,4 - 3,0 mm (max. 3 x 30 mm/
                       or, max. 0,8 x 45 mm)
Feed speed                     approx. 9 m/min.
Electrics             400 V - 3 Ph. - 50 Hz
Conn. value                          3,8 kW
Pneumatic pressure                     6 bar

length  3400 mm incl. roller disc
width   1100 mm incl. roller disc
height  1400 mm
weight   800 kgs