Product

Brandt KD 95

- 20 MM
Brandt KD 95

Technical data

machineedge banding machine
manufacturerBrandt
typeKD 95
part Id-no.2177588
year of construction1993
work-piece width min.65
work-piece length min.160
height of work piece min-max8-55
edge thickness min. max.0,4-20
feed m/min.16
stop sideright
glue indicationglue roller
gluing aggregatehot melt glue
edge magazin roller3
edge magazin strips yes
edge magazin massive20
pressure zonestraight
snippingchamfer-straight
flush milling1
chamfer / radius milling1
profile sliding blade bottom1
buffing aggregate top/bottom1
connection380/50
siteRietberg

Description

*************************************************
single-sided Edge Banding Machine in right-hand
design for hot-melt gluing

Gluing unit for hot-melt granulate.
Glue storage, leak-save, located below glue roller,
so contamination of the machine will be avoided.
Fine dosable glue supply onto the workpiece by glue
roller, no adjustment to workpiece thickness required.
Glue roller turning direction either in parallism or
counter movement.
Controlling of glue temperature by electronic thermostat.
Infra-red hot-melt glue activation.
Automatic edge magazine for roll material and fix lengths.
Equipped with strengthened pre-cut saw vor thick-PVC/ADS
max. 3 x 45 mm.
Standard equipment with edge control including visual display.
Heavy pressure zone with driven, pneum. main pressure roller
as well as 4 free-running post-pressure rollers.
Centralized adjustment of the top pressure.
Swivable operation desk at the machine\\\'s infeed.
Standard equipment with centralized lubrication for
conveyor chain.
Electric equipment with new developped modular control
system for increased operator\\\'s comfort and facilitated
service.
Standard equipment with electronic frequency transformer for
snipping and milling units, noiseless, wear- and tearfree and
energy-saving as well as electroinc motor braking for increased
safety included.

TECHNICAL DATA:

edge thickness              0.4 - 20 mm
roller diameter max.          3 x 45 mm
                or          0.8 x 60 mm
panel thickness               8 - 55 mm
panel width min.                  65 mm
panel length min.                160 mm
feed                              16 m/min.
electrics                 380 V - 3 ph. - 50 cyc.
pneumatic connection min.          6 bar
connected load            approx. 11 kW


Quickmelt-gluing-unit
instead of the standard glue container
roll disk, diameter 800 mm
for the reception of edge roll diameters up to 800 mm,
including holding component

snipping unit chamfer/straight
2 x 0.75 kW
for the snipping of the front and rear edge material overhang
with pulling cut. 2 motors, equipped with one cut-saw blade.
Swivelling range straight to chamfer cutting 0 - 15 degrees.
edge dimensions max. 20 x 40 mm
                or   10 x 50 mm
transformer capacity required 2.2 kVA
space requirement 1200 mm
total capacity 1.5 kW
frequency 200 cyc.

pre-milling unit
2 x 1.5 kW, 0 degrees
for fair-faced milling of the top and bottom edge material overhang.
2 motors one above the other, vertically tracing, can be moved manually
30 mm sideways. Height adjustment of the top motor with the top pressure.
Digital counters for quick adjustment
edge thickness max. 20 mm
panel thickness 8 - 55 mm
suction 2 x diam. 80 mm
space requirement 350 mm
total capacity 3.0 kW
frequency 200 cyc.
rotational speed 12000 rpm

milling unit 2 x 0.55 kW
0 - 25 degrees
for fair-faced miling of the top and bottom edge-material overhang.
2 motors one above the other, tracing vertically and horizontally,
can be moved manually 30 mm sideways. Height adjustment of the top
motor with the top pressure. Digital counters for quick adjustment.
Spindle adjustment for lateral tracing rollers.
Edge thickness max. 12 mm
panel thickness 8 - 55 mm
swivelling range 0 - 25 degrees
suction 2 x diam. 80 mm
space requirements 430 mm
total capacity 1.1 kW
frequency 200 cyc.
rotational speed 12000 rpm

free Place

noise-protection hood
lenght approx. 2200 mm
for 200 cyc. snipping and milling units
suction of the milling units within the hood,
complete with flexible hoses. External connection through
collective suction nozzle diam. 180 mm

scraping unit for PVC-edges
tracing from the top, bottom and laterally, for the chamfering
or rounding of pre-milled PVC-edges. Blowing nozzles pneumatically
controled.
Edge thickness max.      5 mm
panel thickness     8 - 55 mm
Max. lateral movement of the unit top and bottom 30 mm.
Height adjustment of the top device with the top pressure,
incl. 2 WPL-profile knifes, either r = 2 mm or r = 3 mm.
Suction 2 x 60 mm (with chip collection box).
Space requirement 470 mm

buffing unit
2 motors
to make the edges bulky on top and bottom
2 motors each 0.27 kW, single hung-up, adjustable in
inclination, height and laterally. Height adjustment of
the top motor with the top pressure. 2 molleton disks diam.
150 x 20 mm
Space requirement 400 mm
total capacity 0.54 kW
frequency 50 cyc.
rotational speed 2800 rpm


total connected load approx. 11 kW
air connection 1/4\\\"

length approx. 5750 mm
width  approx. 1300 mm
height approx. 2050 mm
weight approx. 2100 k