Hebrock AKV 3005 DK

5 mm
Hebrock AKV 3005 DK

Technical data

machineedge banding machine
typeAKV 3005 DK
part Id-no.2240579
year of construction1999
height of work piece min-max10-45
edge thickness min. max.0,4-5
feed m/min.10
stop sideright
glue indicationglue roller
gluing aggregatehot melt glue
edge magazin roller3
edge magazin strips yes
edge magazin massive5
pressure zonestraight
chamfer / radius milling2
profile trimming / copying (2 motors)1
profile sliding blade bottom1
buffing aggregate top/bottom1
height adjustmentmanually
machine dimension 1
height 1550


year of construction: 1999
Single-sided edge banding machine of HEBROCK,
type AKV 3005 DK, equipped as follows:

in right-hand construction for hot melt gluing
edge thickness                          0,4 -  5 mm
workpiece thickness                   10 - 45 mm
workpiece width min.                         90 mm
workpiece length min.                     260 mm
feed                                       10 m/min.
electrics 380 Volt - 3 Ph. - 50 cyc.
connected load approx.                 10,2 kW

heated infeed fence

gluing unit for hot melt granulates
glue supply to the workpiece by glue roller
autom. edge magazine for roller material
and fixed length incl. reinforced
pre-cutting pinder up to 3 mm
pressure zone with driven main-pressure roller
and 3 post pressure rollers

snipping unit straight
for front and rear edge overhang
1 motor each 0,37 kW, 300 cyc., 18000 rpm.
pulling cut

flush trimming unit top and bottom
with vertical and horizontal tracing
2 motors each 0,6 kW, 300 cyc, 18000 1/min.,
swivelling 0-15, 22, 30 degrees

flush trimming unit top and bottom
with vertical and horizontal tracing
2 motors each 0,37 kW, 300 cyc., 18000 1/min.,
swivelling 0-15, 22, 30 degrees,
pneumatic lift device

corner rounding
for rounding of workpieces
1 motor 0,37 kW, 300 cyc., 18000 1/min.
edge thickness max. 3 mm
edge height max. 30 mm

profile scraping unit for PVC-edges
tracing from top, bottom and laterally, for
chamfering or rounding of pre-trimmed PVC-edges
edge thickness max. 3 mm
pneumatic lift device

chamfer unit (buffing) 2 motors
for smoothing-off the edges top and bottom
2 motors each 0,18 kW

frequency converter 300 cyc.
electronic motor braking for snipping- and
flush trimming units
noise protection covering incl.
centralized suction nozzle diam. 140 mm

length     4300 mm
width       900 mm
height     1550 mm
weight     1100 kgs