Product

Homag KL 59

Homag KL 59

Technical data

machineedge banding machine
manufacturerHomag
typeKL 59
part Id-no.2053706
year of construction1993
machine modelone-sided
work-piece width min.70
height of work piece min-max8-60
edge thickness min. max.0,4-14
feed m/min.10-40
feed speed infinitely variableyes
work-piece overhang40-115
stop sideleft
glue indicationglue roller
gluing aggregatehot melt glue
edge magazin roller0,4-3,5
edge magazin strips yes
edge magazin massive14
pressure zonestraight
snippingchamfer-straight
flush milling1
chamfer / radius milling3
profile trimming / copying (4 motors)1
straight edge sanding1
radius/Chamfer sanding top1
radius/Chamfer sanding bottom1
profile sliding blade bottom2
buffing aggregate top/bottom1
height adjustmentpowered
electronic controlyes
machine dimension without accessories1
length13700
width2400
height 1900
siteRietberg

Description

***********************************************************
Fixed stop side on the left

Basic machine with continuous machine rack and
workpiece conveying device, prepared for
installation of processing units.

Unit carrier lateral adjustable for changing of
workpiece overhang in the range of 40-115 mm.
Precise workpiece conveying device.
Top pressure motorized adjustable in height with
driven V-belt

Electro:
operating voltage 380 Volt, 50 cyc.
control voltage 220 Volt, installed as per VDE
hand switch for one-shift operation
Setting-up of switch cabinet and frequency converter
as well as length of connection cable as per layout plan.

feed infinitely variable 10 - 40 m/min.
panel overhang adjustable 40 - 115 mm
panel thickness 7 - 60 mm
working heigth 905 mm
working width min. 70 mm

1 x left, 1 x right
transport chain rolling

1 x left
execution top pressure with compound V-belts.

1 x left
infeed fence lateral adjustable via fence

1 x left
infeed device 3 rolls tiltable

***********************************
note:
the complete gluing-part is missing
***********************************

1 x left
glue roller drive in case of feed stop

1 x left
hot melt gluing unit QA 34
melting unit with container for granulates
melting capacity depending on glue max.
18 - 35 kg/h.
electronic temperature adjustment with
LED-read-out
glue roller diameter 34 mm
glue roller heated
level control of melting quantity

1 x left
panel pre-heating up to 45 mm panel thickness
for heating of workpiece edge before glue
application
for improvement of gluing quality

1 x left
magazine HL 21
infeed angle 13 degrees
edge thickness 0,4 - 14 mm
edge width 16 - 65 mm
processing 360 mm2
feed of solid edges
feed of strips

1 x left
clipping unit for single roll 3,5 mm
for HL 20-22
edge thickness max. 3,5 mm
edge width max. 65 mm
processing max. - in case of PVC 135 mm2
max. - in case of veneer 100 mm2
roll diameter max. 900 mm

1 x left
magazine height adjustment
for HL 10/11/12/15/20/21/22
adjustment via spindle
adjustment way +/- 10 mm

1 x left
pressure zone G
1 driven pre-pressure roller diameter 200 mm
6 post-pressure rollers diameter 150 mm
pneumatic pressure adjustment
for straight edges
Centralized adjustment for change-over in case
of different edge thicknesses.

1 x left
unit carrier with manually lateral adjustment

1 x left
snipping unit HL 05 chamfer/straight 0,6 kW
2 motors each 0,6 kW, 300 cyc., 18000 rpm
edge thickness straight max. 20 mm
chamfer max. 3 mm
edge width max. 65 mm

1 x left
electronic braking from 0,2 - 3,74 kW

1 x left
pneumatic adjusting device chamfer/straight
for electropneumatic reset from chamfer to
straight snipping. Manual adjustment of lateral
snipping stop necessary in case of varying
edge thickness.

1 x left
Pre-Milling aggregate top/bottom 1,5 KW
2 motors one upon the other, each 1,5 KW, 300 Cy
18000 l/min., manually laterally movable
height adjustment with the top pressure, working
in counter direction
edge thickness max. 20 mm
workpiece thickness 7 - 60 mm
swivelling area +/- 1 degree

1 x left
el. braking from 0,2 - 3,74 KW

2 x left
double roll scanning vertically
Per motor. Required for radius bigger 3 mm and
acute-angled workpieces

1 x left
Milling aggregate top and bottom 0,3 KW
2 motors each 0,3 KW, 300 Cy, 18000 l/min.
manually laterally movable
edge thickness max. 1,5 mm
workpiece thickness max. 60 mm
Swivelling area 0 - 30 degrees

1 x left
el. braking from 0,2 - 3,74 KW

2 x left
adjusting device
for electro-pneumatic lateral movement
to manual 8-fold revolver
separate motor starting

2 x left
double roll scanning horizontally
for lateral scanning of the milling aggregate
required for abtuse-angled workpieces

1 x left
milling aggregate top and bottom1,125 kw
2 motors ech 1,125 KW, 3000 cy., 18000 1/min.
manually laterally movable, height adjustment
with the top pressure, working in counter direction
edge thickness max 14 mm
workpiece thickness max. 60 mm
Swivelling area 0 - 30 degrees

1 x left
el. braking from 0,2 - 3,74 kw

2 x left
adjusting device
for electro-pneumatic lateral operation
to manual 8-fold revolver
separate motor starting

2 x left
double roll scanning vertically
Per motor. Required for radius bigger 3 mm and
acute-angled workpieces

2 x left
double roll scanning horizontally
for lateral scanning of the milling aggregate
required for abtuse-angled workpieces
per motor.

1 x left
noise protection hood aggregate
length approx. 2700 mm, 1 accumulative suction hood
diam. 200 mm

1 x left
aggregate support with manual lateral adjustment

1 x left
milling aggregate top and bottom 1,125 kw
2 motors ech 1,125 KW, 3000 cy., 18000 1/min.
manually laterally movable, height adjustment
with the top pressure, working in counter direction
edge thickness max 14 mm
workpiece thickness max. 60 mm
swivelling area 0 - 30 degrees

1 x left
electronical braking from 0,2 - 3,74 kw

2 x left
adjusting device
for electro-pneumatic lateral operation
to manual 8-fold revolver
separate motor starting

2 x left
double roll scanning vertically
Per motor. Required for radius bigger 3 mm and
acute-angled workpieces

1 x left
free space for installation of another milling aggregate

1 x left
form milling aggregate bottom 0,3 KW
2 motors each 0,3 kw, 300 cy., 18000 1/min.
separate motor starting
edge thickness max. = 4 mm
workpiece length min. = 80 mm
with quick-change device for radius/chamfer
without tools

Change: motors with 0,6 KW instead of 0,3 kw

1 x left
electronical braking from 0,2 - 3,74 kw

1 x left
form milling aggregate top 0,3 KW
2 motors each 0,3 kw, 300 cy., 18000 1/min.
separate motor starting
edge thickness max. = 4 mm
workpiece width min. = 40 mm
max. = 60 mm without working
workpiece lenth min. = 80 mm
with quick-change device for radius/chamfer
without tools

Change: motors with 0,6 kw instead of 0,3 kw

1 x left
electronical control 0,2 - 3,74 KW

1 x left
noise protection hood aggregate
length approx. 3100 mm, 1 accumulative suction hood
diam. 180 mm

1 x left
scraping unit profile
scanning from top, bottom and laterally
for chamfering and rounding of pre-milled
PVC-edges. Blast nozzle electro-pneumatically
controlled.
Edge thickness max. 5 mm
Aggregate top and bottom mx. 50 mm laterally
movable. Height adjustment with the top pressure.
Without tools. suction box for PVC-chips

1 x left
adjusting device milling motor pneumatically
for electropneumatic lateral operation
to manual 8-fold revolver
separate motor starting

2 x left
double roll scanning vertically
Per motor. Required for radius bigger 3 mm and
acute-angled workpieces

2 x left
double roll scanning horizontally
for lateral scanning of the milling aggregate
required for abtuse-angled workpieces
per motor.

1 x left
scraping unit profile
scanning from top, bottom and laterally
for chamfering and rounding of pre-milled
PVC-edges. Blast nozzle electro-pneumatically
controlled.
Edge thickness max. 5 mm
Aggregate top and bottom mx. 50 mm laterally
movable. Height adjustment with the top pressure.
Without tools. suction box for PVC-chips

Hint: here without suction box

2 x left
adjusting device milling motor pneumatically
for electropneumatic lateral operation
to manual 8-fold revolver
separate motor starting

2 x left
double roll scanning vertically
Per motor. Required for radius bigger 3 mm and
acute-angled workpieces

2 x left
double roll scanning horizontally
for lateral scanning of the milling aggregate
required for abtuse-angled workpieces
per motor.

1 x left
edge heating overstretch crazing flap gate control
for the deletion of overstretch crazing with PVC-edges,
top and bottom. Consisting of:
- air heater with temperature regulation
via electronical controller and digital display
- flap gate control
- protection fence

1 x left
Belt sanding aggregate KS 10
for sanding of straight edges
sanding belt speed 10 m/sec.
belt length = 2100 mm
belt width = 120 mm
Sanding pressure manually adjustable
Belt radiation via nozzle
Oscillating device


1 x left
Adjusting device belt sanding aggregate pneumatically
for electropneumatic lateral movement
on manual 8-fold revolver for different edge thicknesses

1 x left
chamfer/radius sanding aggregate bottom PS41
1 motor 0,55 kw
workpiece thickness min. 12 mm
Radius max. 12 mm
sanding belt length 2000 mm. Width 20 - 35 mm
Belt speed 7 m/sec.
Sanding pressure manually adjustable
Without sanding shoe

1 x left
adjusting device pneumatically
for electropneumatic lateral operation
to manual 8-fold revolver
per motor

1 x left
chamfer/radius sanding aggregate top PS 42
1 motor 0,55 KW
height adjustment with the top pressure
workpiece thickness 12 - 60 mm
Radius max. 12 mm
sanding belt length 2000 mm, width 20 - 35 mm
belt speed 7 m/sec.
sanding pressure manually adjustable
without sanding shoe

1 left
adjusting device pneumatically
for electropneumatic lateral operation
to manual 8-fold revolver
per motor

1 x left
cleaning agent application top/bottom

1 x left
EDGE BUFFING UNIT TOP + BOTTOM
with oscillation
for smoothing-off the edges
2 motors each 0,25 kW
adjustable in inclination and height
height adjustment with top pressure
oscillation device in order to exploit the com-
plete disk width, for top and bottom motor.

1 x left
work piece support for single-sided machines

Change: extended extraction of workpiece support
approx. 1200 mm

1 SPS control
System HOMATIC 2000 with LED display
of all entries and exits
integrated control unit for contact-free control of
the operation aggregates.
- Multitask control of SPS for precise aggregate input
- selectable number of pieces in the machine
- compatible interface to all HOMATIC input systems
allowed environment temperature min. + 5 degrees max.
+ 35 degrees celsius

1 input NC 20

1 control cabinet approx. 3600 x 600 x 2000 mm

****************************************
the transformer 300 cy. is missing
****************************************

air connection 1 x 1", 6 bar, 1 x 1/2", 6 bar
connected load approx. 91 A

length approx. 13700 mm
width approx. 2400 mm
height approx. 1900 m