Product

Homag KF 64

3000 mm
Homag KF 64

Technical data

machineFormat+Kantenanleimmaschine
manufacturerHomag
typeKF 64
part Id-no.2179444
siteRietberg

Description

***********************************************************
year of built: 1986, reconditioned in 2008,
photos from 2008

fixed side on the left, mobile side on the right

basic machine with continuous machine frame
prepared for installation of panel sizing and
edge banding units.

precise workpiece transport device

upper pressure motorized adjustable in height
driven V-belt
glue roller drive in case of feed stop
motorized width adjustment via fast-creep speed
with ball roll spindles

electric equipment:
operating voltage 400 volt, 50 cyc.

feed infinitely variable approx. 10 - 40 m/min.
workpiece overhang adjustable approx. 30 - 115 mm
workpiece thickness approx. 12 - 60 mm (8 mm can be tried)
working width double-sided max. approx. 3000 mm
working width double-sided min. approx.    250 mm
(dependent on machine equipment)

1 x left, 1 x right
chain track extension machine II + 500
for placing the parts in front of the
stop cams

1 x left, 1 x right
conveyor chain, rolling
with ball bearings at running and
guiding surfaces. Width of chain plates 70 mm
bloc link chain with immersible stop cams
distance 1000 mm

1 x left, 1 x right
autom. cams control at man. 4-fold revolver

1 x left, 1 x right
infeed device 3 rollers tiltable

1 x left
infeed fence for protective layer overhang,
manual lateral adjustable

2 x right
alignment station

1 left, 1 x right
counter pressure device
mounted at top pressure, for
safety feeding of workpiece at stop cams

1 x left, 1 x right
wood support rails internal and external,
single-sides springed

1 x left, 1 x right
prescoring unit 1,5 kW
controlled
1 motor 1,5 kW, 100 cyc. 6000 rpm.
with lifting device.
Assembly at hogging motor.
For tool diameter max. 180 mm.
Without tools.
space requirement: 400 mm

1 x left, 1 x right
hogging unit 6,6 kW
1 motor 6,6 kW, 100 cyc., 6000 rpm.
Mounting surface for scoring motor
cross support, double suction hood.
Swivelling by 15 degrees in case of panel over-
hang = 60 mm.
Star-delta connection.
Tool diameter max. 250 mm.
Without tools.
space requirement: 505 mm

1 x left, 1 x right
trimming column, 2  guides

1 x left, 1 x right
standard trimming unit
pneumatic control 4,5 kW
1 trimming motor 4,5 kW, 100 cyc. 6000 rpm.
Cross support,pole-changing switch f. direction
of rotation, suction hood, intermediate support
with round guide, electropneumatic control for
intermittent trimming,swivelling range 90 degr.
for tool diameter max. 200 mm
Without tools.
space requirement: 550 mm

1 x left, 1 x right
noise protection hood sizing part
noise protection sizing part
with centralized suction,
additional workpiece blowing-off
after hood.
Hood interlocking of all doors and total
switching-off through key switch of all
sizing motors
In case of adjusting workds.

1 x left, 1 x right
unit beam for installation of processing units
with side adjustment for manual changing of
workpiece overhang in range of 40-110 mm

1 x left, 1 x right
preheating - 60 mm

1 x left, 1 x right
hot melt gluing unit QA 34
melting unit with container for granulates
melting capacity depending on glue max.
18 - 35 kg/h.
electronic temperature adjustment with
LED-read-out
glue roller  diameter 34 mm
glue roller heated
level control of melting quantity

1 x left, 1 x right
magazine HL 22
infeed angle 8 degrees
edge thickness              0,4 - 20 mm
edge width                   16 - 65 mm
processing                       900 mm2
feed of solid edges
feed of strips

1 x left, 1 x right
roll change device 2 x 3,5 mm
edge thickness                   max.  3,5 mm
edge width                       max.   65 mm
processing max.   - in case of PVC     135 mm2
           max.   - in case of veneer  100 mm2
roll diameter                    max.  900 mm
roll change automatically or manually 2x1 roll
clipping unit
remnant edge length control at 3300 mm
for HL 20-27

pressure zone:
pressure zone G with 6 post-pressure rollers diameter 150 mm
and 1 driven pre-pressure roller diam. 200 mm
pneumatic pressure adjustment

1 x left, 1 x right
unit beam for installation of processing units
with side adjustment for manual changing of
workpiece overhang in range of 40-110 mm

1 x left, 1 x right
snipping unit HL05 chamfer/straight
2 motors each 0,6 kW, 300 cyc., 18000 rpm
edge thickness  straight  max.  20 mm
                chamfer   max.   3 mm
edge width                max.  65 mm
2 special TCT snipping saws diameter 110 mm

1 x left, 1 x right
pneumatic adjusting device
chamfer/straigth HL 04/05/81/83
for electropneumatic reset from chamfer to
straight snipping. Manual adjustment of lateral
snipping stop necessary in case of varying
edge thickness.

1 x left, 1 x right
rough trimming unit top and bottom
2 motors one above the other,
each 1,5 kW, 300 cyc.,18000 rpm.
manual lateral movement, height adjustment
with the top pressure, working in opposite
movement
edge thickness max.      20 mm
workpiece thickness  7 - 60 mm
swivelling range +/-  1 degree
without tools
space requirement 350 mm

1 x left, 1 x right
trimming unit top and bottom 0,6 kW
2 motors each 0,6 kW, 300 cyc., 18000 rpm.
manual lateral movement
height adjustment with the top pressure
working in opposite movement
spindle adjustment for lateral tracer roller
edge thickness max.       8 mm
workpiece thickness max. 60 mm
swivelling range 0 - 30 degrees
without tools

1 x left, 1 x right
pneumatic adjusting device for trimming motor
for electropneumatic lateral movement out of
the processing area.
on manual 8-fold turret
Separate motor connection.

1 x left, 1 x right
profile trimming unit FF12 bottom/top 0,3 kW
for crosswise processing of Postforming-Soft-
forming parts and rounding of plastic edges at
panel front and rear edge top and bottom.
4 motors each 0,3 kW, 300 cyc., 18000 rpm
separate motor connection
edge thickness   max.  4 mm
panel thickness  max. 40 mm with processing
                 max. 60 mm without processing
panel length     min. 80 mm
with quick changing device for radius/chamfer
without tooling
Feed max.20 m/min. Panel distance approx.600 mm
space requirement: 1350 mm

1 x left, 1 x right
universal trimming unit UF 12  4 kW
trimming column with 2 cross supports and
spindle adjustments
2 motors each 4 kW, 300 cyc., 9000 rpm.
motors swivelling by max. 90 degrees,
2 suction hoods top
pole-changing switch for direction of rotation
for tool diameter max. 150 mm
without tooling

2 x left, 2 x right
intermediate support with electropneumatic control
swivelling, for intermittent trimming
Note: only for motor 1

1 x left, 1 x right
noise protection hood post-processing part
noise protection post-processing part
With single suction nooze for units and
hood interlocking of all doors and total
switching-off through a key switch of
all post-processing units/motors in case
of adjusting works.

1 x left, 1 x right
belt sanding unit KS 10
for sanding of straight edges
sanding belt speed 10 m/sec.
belt length 2100 mm
belt width   120 mm
sanding pressure manually adjustable
belt cleaning via nozzle
oscillation device

1 x left, 1 x right
scraping unit profile
tracing from top, bottom and laterally
for edge buffing or rounding-off pre-trimmed
PVC-edges, blowing nozzles with electro-
pneumatic control
edge thickness max.  5 mm
unit top and bottom laterally adjustable by
max. 50 mm.
height adjustment with the top pressure
without tooling
suction box for PVC-chips

1 x left, 1 x right
pneumatic adjusting device for trimming motor
for electropneumatic lateral movement out of
the processing area.
on manual 8-fold turret
Separate motor connection.

1 x left, 1 x right
scraping unit glue joint
Removal of glue rests in the area of glue joint
tracing from top and bottom
height adjustment with top pressure
with hard metal knife
Blowing nozzles with electropneumatic control
Unit top and bottom laterally adjustable by
max. 50 mm.

1 x left, 1 right
pneumatic adjusting device for trimming motor
for electropneumatic lateral movement out of
the processing area.
Separate motor connection.

1 x left, 1 x right
outfeed intermediate transport,
in extension of transport chain,
length approx. 700 mm

1 converter 100 cyc.
1 converter 300 cyc.
1 switch cabinet

1 x HOMATIC-ELECTRONIC CONTROL ES 00
Programmable memory control (PLC).
System \\\'HOMATIC 2000\\\' with indication of all
inputs and outputs by means of luminous diodes.
Integrated line control for remote control
of processing units.
- multi-tasking control of PLC for precise
  unit operation
- free number of workpieces in the machine
- compatible interface to all Homatic-input
  systems
permissible environmental temperature
min. + 5 degrees Cels., max. + 35 degrees Cels.

1 x input NC21
with graphic surface
for an easy and comfortable operation and
programming of a Homag machine.

Hardware:
- industrial computer 68040 with 16 MByte RAM
- 1 PCMCIA fixed-disk 170 MByte
- 1 free PCMCIA insert for data securing
- colour display 12,1 inch with PC compatible
  keyboard integrated in operation desk at the
  infeed
- expandable with network connection Ethernet

Software:
- real-time operation system OS9 with Windows
  surface
- operation with Windows standard via selection
  menu
- menu conducted creation of operation programs
- production according to operation programs
- contact plan diagnostic PLC on the display

Remote diagnostic:
- telephone modem /analog-) against separate
  charging
- 2 telephone lines are to be installed up to
  the machine by the customer. One of these 2
  lines should include a telephone.

1 electrinic width adjustment

1 electroniv height adjustmen