Product

Homag

KFL 21/03/22/QE/25
Homag

Technical data

machineFormat+Kantenanleimmaschine
manufacturerHomag
part Id-no.2042244

Description

**************************************************
KFL21/.. one and a half-sided left-hand stop

Double-sided HOMAG panel sizing and single-
sided edge banding machine.

Fixed stop side on the left, movable side on
the right.

BASIC MACHINE:
--------------
- with continuous machine frame and unit beam,
  prepared for double-sided installation of the
  panel sizing units and single-sided installa-
  tion of the edge banding and postprocessing
  units
- glue roller driven in case of feed stop

WORKPIECE TRANSPORT DEVICE:
---------------------------
- chain conveyour separated on the fixed side
- rolling block link chain with ball bearings
  at running and guiding surfaces
- with precise, hardened running and guiding
  surfaces
- magnetic motor braking of the transport chain

TOP PRESSURE:
-------------
- with driven, continuous compound V-belt
- motorized height adjustment via cardan drive
  with digital position read-out

WIDTH ADJUSTMENT OF THE MOVABLE SIDE:
-------------------------------------
- linear guide as well as rolling guides on
  hardened supports
- motorized rapid/slow gear drive
- ball-screw spindles and cardan drives for
  precise positioning
- digital position read-out

ELECTRIC EQUIPMENT:
-------------------
Please indicate voltage(basis 380 volt/50 cyc.)
- operating voltage ... volt, .. cyc.
- control voltage ... volt, .. cyc.
- installed according to European Norm EN 60204
- hand switch for setting operation
- separate switch cabinet
- connection cable to the machine according to
  the installation plan

HOMATIC ELECTRONIC CONTROL:
---------------------------
- programmable memory control (PLC) with LED
  display of all inputs and outputs.
  Integrated line control for contactless
  control of the processing units.
- multitask control of the PLC for precise
  unit operation
- arbitrary number of workpieces in the machine
- compatible interface to all HOMATIC input
  systems
- permissible environmental temperature:
  min. +5, max. 35 degrees Cels.

SAFETY AND PROTECTION FACILITIES:
---------------------------------
- all machines destined for EC member countries
  are fitted with CE plates in accordance with
  EC Machine Directive 98/37/EC Appendix IIA
- Wood dust protection max. 2 mg/m3, subject
  to the required extraction capacity being
  provided by the customer according to the
  suction plan.
- documentation

TECHNICAL DATA:
---------------
- feed infinitely variable       10 - 40 m/min.
- workpiece overhang                      40 mm
- workpiece thickness                 8 - 60 mm
- working height up to upper chain
  surface                                950 mm
- working height double-sided min. 240 - 270 mm
  (depending on machine equipment)
- working width double-sided max.       2500 mm
- pneumatic connection                  7-8 bar
- the technical data for the basic machine may
  vary due to the processing units.
- floor conditions have to correspond to the
  foundation plan.


further equipment:
------------------

1 x left
infeed fence adjustable via steplessly axis

1 x left
high-performance packet for feed up to 60 m/min.

27 x left
rolling transport chain

8 x left, 8 x right
rolling transport chain

20 x left, 20 x right
stepless stop cams

1 x left, 1 x right
steplessly adjustable stop cams automatic

1 x left
infeed device 4 rollers tiltable

1 x left
electropneumatic tilting movement

1 x left, 1 x right
panel taking over device

1 x left, 1 x right
stepless axis vertical for UF 11/12

1 x left, 1 x right
chain track extension machine II + 500 mm

1 x left
centralized drive for KFL/R21

1 x left
stepless axis for overdrive

1 x left
cam lowering for separated basic machines

1 x central support automatic for KFL/R21

5 x extension of central support

1 x feed drive with automatic control from 6 kW

1 x left, 1 x right
execution D - double top pressure

25 x left
extension of double top pressure by one step

4 x right
extension of double top pressure by one step

1 x left, 1 x right
compact double hogger longitudinal/cross 6,6 kW KD11

3 x left, 3 x right
electronic braking from 3,75 - 7,4 kW

3 x left, 3 x right
motor shaft D=40 for mounting of hydro clamping

1 x left
stepless axis horizontal

1 x left, 1 x right
noise protection panel sizing part 1000 mm

3 x left, 3 x right
extension noise protectin panel sizing part by 100 mm

1 x left
unit beam 500 mm long

16 x left
extension unit beam by each 100 mm

1 x left
lateral adjustment of unit beam stepless

1 x left
panel pre-heating up to 45 mm panel thickness

1 x left
hot melt softforming unit QE 34

1 x left
glue container back-off in case of feed stop

1 x left
hot melt granulate transport system

1 x left
magazine HL 15 - 6 rolls 3,5 mm

1 x left
magazine - height adjustment

1 x left
edge holding-down device stepless via axis adjustment

1 x left
additional kit for hot melt softforming/E

1 x left
pressure zone C with 3 post-pressing rolls
autom. 8-fold

1 x left
adjusting device pressure zone autom. 8-fold

1 x left
separating agent spray device top/bottom

1 x left
adjusting device autom. 8-fold

1 x left
snipping unit HL04 chamfer/straight

1 x left
electronic braking from 0,2 - 3,74 kW

1 x left
adjusting device chamfer/straight for HL-snipping

1 x left
overhang modification HL 04-05 automatic

1 x left
standard trimmng unit pnaumatic control 4,5 kW

1 x left
electronik braking from 3,75 - 7,4 kW

1 x left
stepless axis horizontal

1 x left
stepless axis vertical

1 x left
hood interlocking for noise protection cover

1 x left
trimming column 2 guides

1 x left
dividing wall for noise protection cover

1 x left
free space approx. 650 mm

1 x left
unit beam 500 mm long

23 x left
extension unit beam by each 100 mm

1 x left
lateral adjustment of unit beam stepless

1 x left
pre-trimming unit top and bottom 0,6 kW

1 x left
electronic braking from 0,2 - 3,74 kW

2 x left
adjusting device trimming motor pneumatic

1 x left
trimming unit top and bottom 0,6 kW

2 x left
plug type connection for motor max. 1,5 kW

1 x left
electronic braking from 0,2 - 3,74 kW

2 x left
adjusting device trimming motor pneumatic

1 x left
profile trimming unit FF12 bottom/top 0,3 kW

2 x left
electronic braking from 0,2 - 3,74 kW

1 x left
empty stroke device profile trimming top

1 x left
empty stroke device profile trimming bottom

1 x left
unit beam 500 mm long

25 x left
extension unit beam by each 100 mm

1 x left
lateral adjustment unit beam stepless

1 x left
profile trimming unit FF12 bottom/top 0,3 kW

2 x left
electronic braking from 0,2 - 3,74 kW

1 x left
empty stroke device profile trimming top

1 x left
noise protection panel sizing part by 100 mm

66 x left
extension noise protection panel sizing part by 100 mm

1 x left
noise protection door interlocking
according to BG-prescriptions

1 x left
scraping unit - profile

2 x left
adjusting device pneumatic

1 x left
scraping unit glue joint

2 x left
adjusting device pneumatic

1 x left
edge heating device - overstretch crazing

1 x left
free space for buffing-aggregat

1 x panel support for single-sided machines

22 x extension panel support

1 x frequency converter 7,5 kVA 300 cyc. IP 54

1 x frequency converter 40 kVA 100 cyc. IP 54

1 x electronic frequency invertor 45 kW

1 x Homatic electronic control ES 00

25 x left
extension Homatic electronic control FL 10/20

1 x left
electronic height adjustment

1 x left
electronic width adjustment Servo EB 10/2

1 x production line control NC50

1 x flexible edge sequence control

1 x resetting in the gap

1 x cooling unit for switch cabinet

1 x software barcode-control for NC 50

1 x left
network connectino Ethernet with TCP/IP

1 x left
network file system (NFS) under TCP/IP 5.520

1 x cable extension switch cabinet - machine L 30

1 x guiding tube for cable supply from top

1 x cable extension switch cabinet - operator pane