KUPER QFS 850 System Josting
The KUPER QFS 850 is made for quick and neat cutting to length of veneer packs. Tear-out-free cutting is assured by the powerful, vertical operation of the knife. An excellent view of the veneer and cutting area is afforded by the narrow construction.
- perfect for quick and neat cutting to length of veneer packs
- narrow construction
- cuts of highest quality thanks to the swinging and powerful drawing motion of the knife
A green light beam clearly indicates the cutting line. Lengths are indicated on 2 measuring tapes. The pressure bar is lowered at the same time as the knife. Quick and powerful operation of the knife is assured by a brake motor, gear unit and crank drive. The cut is actuated by a two-hand pushbutton control.
Control operations can be performed directly adjacent to the cutting area on the right or left-hand side.
If you need an angular arrangement on the right or left-hand side of a longitudinal veneer jointing guillotine or on both sides, we will design the work tables accordingly.
The machine is equipped with a safety-orientated electric control system, a Plexiglas guard and plug-in type angular stops.
Also available on request: Work tables of greater lengths with intermediate supports and length stops.
This special machine promises you high performance, minimum maintenance and optimum veneer cuts.
openTechnical data KUPER QFS 850
|Cutting width||850 mm|
|Insertion height||60 mm|
|Max. thickness of single sheet|
for sliced and peeled veneers
|approx. 3,0 mm|
|Operating voltage standard||400 V, 3 Ph, 50 cycl. or special voltage|
|Total connected load||approx. 4,00 kVA|
Additional technical data upon request. Illustrations may contain options. Additional components such as control cabinets, safety facilities e.g. may are not be shown. Subject to design modification.