KUPER KLM 470/700 – Precise glue application for veneer bundles. Both PVAc or urea-based glues can be used.
The operator places the veneer bundle which has been cut parallel before onto the transport rollers. Height of the veneer bundle is detected by a laser at the infeed of the machine. Depending on this height all parameters for alignment and glueing process of the bundle are adjusted automatically.
The special concept of the top pressure device makes it possible to press the veneer bundle on both sides in the area of the glue rollers. This safely avoids any glue penetrating into the bundle! The very precise glueing and the high efficiency make the KLM your best choice. By linking the KUPER KLM with the double knife guillotine KUPER ZFS the efficiency is even further enhanced. Data flow is provided by the Siemens S7 control then. The information “width of bundle” is communicated from the ZFS to the KLM. The alignment rollers open accordingly with high speed to the corresponding opening position.
Advantages at a glance
- all drive elements maintenance free
- simple cleaning of the gluing aggregates
- fast take-out of single rollers from the infeed conveyor
- high alignment and feed speed
- longer pot-life of the glue due to reduced rotation speed of the glue rollers in stand-by
- left- or righthand execution allow the integration of the machine into existing production lines
openTechnical data KUPER KLM 470/700
|Feed Speed||approx. 35 m/min.|
|Length of veneer bundle||from approx. 250 mm|
|Width of veneer bundle||approx. 50 – 470 mm or |
approx. 50 – 700 mm
|Height of veneer bundle||approx. 3 – 50 mm|
|Operating voltage||400/230 V, 3 Ph + N + PE, 50 Hz cycl. or special voltage|
|Total connected load||approx. 5,7 kVA|
Important functions of the machine are put in and read out over the central touchpanel. Operation parameters for different veneer species can be stored in and recalled from a data base.
Top pressure unit
The special concept of the top pressure unit enables a both-sided pressing of the veneer bundle during the
glueing process. With this new technology the penetration of glue into the veneer bundle is avoided.
Option – Cooling of the glue pots
Operating the optional cooler prolongs the pot-life of urea-based glues considerably, resulting in more continuous working hours without interruptions.
Photo shows option cooling of the glue pots. Additional technical data upon request. Illustrations may contain options. Additional components such as control cabinets, safety facilities e.g. may are not be shown. Subject to design modification.D.B.P. and foreign patents.