Thomas Ottemeier
+49 (0) 52 44/9 84 – 4 84
Reimund Dörhoff
+49 (0) 52 44/9 84 - 3 72
Sign in for our KUPER newsletter

Subscribe to the free newsletter and ensure that you will no longer miss any offers or news of KUPER.

Holzher 1487 V

Shipping time on request

Contact
Thomas Ottemeier
+49 (0) 52 44/9 84 – 4 84
Reimund Dörhoff
+49 (0) 52 44/9 84 - 3 72
  • 2179277
Lieferbedingungen: FCA Rietberg ausschl. Fracht, Verpackung, Versicherung, Montage und Einweisung. Zwischenverkauf und Irrtum vorbehalten.
Abbildungen/Fotos können von der tatsächlichen Ausstattung abweichen.
*************************************************************** Single-sided edge banding machine... more
part Id-no.: 2179277
manufacturer: Holzher
type: 1487 V
machine: edge banding machine
gluing aggregate: hot melt glue
year of construction: 2002
weight: 2800 kg
width: 1300 mm
height : 2000 mm
flush milling: 1 Anzahl pro Seite
height adjustment: powered
Profilziehklinge: 1 Anzahl pro Seite
edge magazin massive: 15 (25) mm
feed : 16 m/min
pressure zone: straight
edge magazin roller: 3 mm
edge magazin strips : yes
work-piece width min.: 60 mm
electronic control: yes
Kantenstärke min. - max.: 0,4-15 mm
buffing unit: 1 Anzahl pro Seite
snipping: chamfer-straight
height of work piece min-max: 6-60 mm
stop side: right
length: 7600 mm
site: Rietberg
work-piece length min.: 140 mm
Flachziehklinge: 1 Anzahl pro Seite
glue indication: LEIMDÜSE
connection: 400/50 Volt / Hz
profile trimming / copying (4 motors): 1 Anzahl pro Seite
jointing-/profile-trimming: 1 Anzahl pro Seite
assignment: 4.2
*************************************************************** Single-sided edge banding machine... more
Product information "Holzher 1487 V"
***************************************************************
Single-sided edge banding machine in lefthand construction with
roller top pressure

- edge thickness:                   0,4 - 15 mm (25 mm)
- edge height:                           66 mm
- panel thickness:                    6 - 60 mm
- kind of edges:              coil and stripes material
- feed speed:           12/16 m/min.
- with adjustable infeed level in magazine area
- wth large magazine disc 820 mm diam. for edge rolls
  up to 800 mm diam.
- with conveying chain incl. automatic conveying rails lubrication
- with motorized position-controlled bridge-height adjustment
- with locking roll for shortest panel sequency
- with safety and noise protection hoods
  over the complete machine (exceptions possible
  in case of individual units)
- with centralized connection for extraction (1 x diam. 160 mm),
  for rough trimming unit (1 x diameter 120 mm)
  and optional for chip collecting box (1 x diam. 100 mm)

- programmable memory control (PLC) for
  rational rebuilding
  - swiveling operator panel in eye sight
  - dust-proof foil keyboard with softkeys
  - LED-display for unit pre-selection
  - large LCD-display clear text display and graphic
-    program list with program frames and -numbers
  - extensive program memory  (PCMCIA-card)
  - individual selection of units
    unit function in clear text and graphical support
     - automatic operating data logging with
    logging of total data as well as individual data per
    program for edge length, quantity and processing time
  - setting-up via fine adjustment
    (depending on equipment)
  - integrated line control ? line points
    are generally or program-specific saved
  - service signal in clear text
  - with interval display for shortest workpiece distance

control:
1 colour screen SPK 18000 CO
LCD-colour screen, back-lighted, resolution
640 x 480 pixel,
adjustable to 8 different colours

basic machine:

1 spraying device for infeed area 1856
(non-stick agent)

1 spraying device for outfeed area 1856
(cleaning agent)

1 feed from 12/16 m/min

jointing trimming unit:
1 jointing trimming unit 1961
(2x2,0 kW, 200 Hz., 12000 min.-1)
With two immersion-controlled trimming unit
1. unit in normal run
2. unit in counter run
immersion way 5 mm
with statical frequency converter 200 Hz.
without trimming tools
(up to max. 13 mm edge thickness)
(only in connection with edge supply 1901)

special equipment for 1961:
1 infeed fence extended motorized adjustable

1 automatic height adjustment of tools by pneumatic

tool for 1961:
1 diamond cutter K/F 100-48-30 DKN, T = 2+2+2
in front left run, behind right run

edge magazine:
1 edge supply 1901
full-automatic for coil and strips material
incl. support disc diam. 820 mm
edge length min. 350 mm

glue spreading station:
1 glue spreading station 1906
(1 x 1,9 kW, 50 Hz)
for hot melt glue in cartridge form
glue spreading by nozzle technique
workpiece height 6 - 60 mm,
(depending on feed speed and glue viscosity)
magazine capacity:
  cartridge shaft: 4 cartridges (approx. 1,4 kgs)
heating-up time approx. 4-5 min.
feed max. 16 m/min.

special equipment for 1906:
1 automatic glue height adjustment (tracing nozzle)

1 pressure controller for regulation of cartridge pressing pressure

press work:
1 press work 1926 K, motorized
  up to 25 mm edge thickness with 3
  individual, intermittent-controlled pressure rolls,
  1. roll driven, 2 conic post pressure roll,
  program controlled adjustment of edge thickness via SPS

Kappaggregat:
1 snipping unit 1918
(2 x 0,35 kW, 300 Hz., 9.000 rpm.)
For coil- and strips material up to 15 mm edge thickness,
compact unit with 2 sawing motors,
pneumatic swivelling 0/10 degrees
each saw blade is individual swiveling
incl. 2 saw blades diam. 110 x 22 x 3,6 mm, Z20

1 trimming unit 1920
(2 x 1,1 kW, 50 Hz, 12000 rpm.)
For flush- and radius trimming top and bottom
flush trimming up to max. 20 mm
radius trimming up to max. R = 3 mm
mounting length: 570 mm

trimming unit corner processing:
1 profile trimming unit 1934
(2 x 0,45 kW, 200 Hz, 12.000 rpm.)
trimming from bottom, for processing of front
vertical edge, of bottom longitudinal edge and rear
vertical edge;
incl. corner copying
inkl. frequency converter 200 Hz
inkl. tool, incl. reverse plates R=3 mm
possible radii: R=2, 3, 4, 5 mm
mounting length: 840 mm

1 profile trimming unit 1933
(2 x 0,45, 200 Hz, 12.000 rpm.)
trimming from top, for processing of front
vertical edge, top longitudinal edge and rear
vertical edge;
incl. corner copying
inkl. frequency converter 200 Hz
inkl. tool, incl. reverse plates R = 3 mm
possible radii:  R= 2, 3, 4, 5 mm
mounting length: 800 mm

equipment for 1934/1933:
with special tools also for chamfering 15 degrees + 45 degrees
with 2 digital counters for sensing ring, horizontal,
with digital counter for horizontal adjustment,
with digital counter for adjusting of sensing ring
for cutter (2 pc. horizontal/vertical)
feed up to 24 m/min. for longitudinal edges
up to 16 m/min.; for corner rounding
radii up to 5 mm
workpiece thickness up to 30 mm

special equipment for 1934/1933
1 profile trimming unit 1934 motorized
(incl. 3 servomotors)

1 profile trimming unit 1933 motorized
(incl. 3 servomotors)

scraping unit:
1 scraping unit 1929
with manual adjustment of horizontal tracing rollers,
for chamfer and radii up to max. R = 3 mm,
with 2 scraping unit carrier, incl. reverse plate R 3 mm
with 2 digital counters for horizontal tracing rollers and
chip scraper
(only in connection with pneumatic adjustment)
mounting length: 300 mm

special equipment for 1929
1 pneumatic immersing and emerging top and bottom separated
up to edge thickness 30 mm (lift 35 mm)

1 chip collecting box

surface scraping unit:
1 surface scraping unit 1964
top and bottom separate intermittent-controlled
for scraping of glue residuals for a clean glue joint,
incl. 2 blowing nozzles, incl. 2 reverse knives

1 buffing unit 1944 K
(2 x 0,2 kW, 50 Hz., 1.400 min.)
for cleaning and polishing of edges with
2 textile discs
inkl. immersion control,
swiveling range 0-5 degrees
mounting length: 340 mm

electrical connected load 52 A, 17 kW
air connection 3/8", min. 7 bar

length:  7600 mm
width:   1300 mm
height:  2000 mm
weight:  2800 kgs
Related links to "Holzher 1487 V"
Holzher 1417 K Holzher 1417 K - 8 mm, Fügen
edge banding machine
part Id-no.: 2246186
year of construction: 2001
Brandt KDF 670 PROFILI Brandt KDF 670 PROFILI - 12 mm, Fügen
edge banding machine
part Id-no.: 2245010
year of construction: 2005
Holzher 1487 TRIATHLON Holzher 1487 TRIATHLON - 15 (30) mm, Fügen
edge banding machine
part Id-no.: 2246491
year of construction: 2005
Schirmer EF Schirmer EF
milling machine
part Id-no.: 2062126
year of construction: 1992
Homag KLM Homag KLM KFL 21/03/22/QE/25
Format+Kantenanleimmaschine
part Id-no.: 2042244

Kuper KLM Kuper KLM
glue spreading machine
part Id-no.: 0600380
year of construction: 2004
IMA HKA IMA HKA
edge banding machine
part Id-no.: 2238979
year of construction: 2001
Hebrock AKV 2002 DK Hebrock AKV 2002 DK - 8 mm
edge banding machine
part Id-no.: 2238101
year of construction: 1997
Ganner COMBI RB 110 Ganner COMBI RB 110 23 Spindeln
dowel hole drilling machine
part Id-no.: 2232321
year of construction: 1981
€2,200.00 Plus VAT
Nottmeyer KOMET SUPE Nottmeyer KOMET SUPE
dowel hole drilling machine
part Id-no.: 2128833
year of construction: 1991
/is/htdocs/wp12444693_8A2VGQU90G/www/vhosts/relaunch.kuper.de/shop/custom/plugins/CytrusImport/Files/2250533 (1).jpg Weeke VENTURE 1 XL 3-Achs 5250 x 1250 mm
CNC-machine
part Id-no.: 2250533
year of construction: 2011
STETON CM 104 STETON CM 104 660 x 330 mm
long hole drilling machine
part Id-no.: 2249573
year of construction: 2003
Kuper ZV 800 E Kuper ZV 800 E 800 mm
cross cutter
part Id-no.: 2236601
year of construction: 1985
Scheer DB 22 Scheer DB 22 2700 mm
dowel hole drilling machine
part Id-no.: 2248201

Kuper FW/MINI 630 ST Kuper FW/MINI 630 ST
veneer splicing machine
part Id-no.: 2247455
year of construction: 1982
Nolting LCK 215/270 Nolting LCK 215/270
heating boiler
part Id-no.: 2247258
year of construction: 1998
€4,900.00 Plus VAT
Josting EFS 2600 Josting EFS 2600 2600 mm
veneer guillotine
part Id-no.: 2245973
year of construction: 1974
€3,800.00 Plus VAT
BARTSCHER BS 15/173 BARTSCHER BS 15/173 1500 kg 600 x 2300 mm
lifting device
part Id-no.: 2242314
year of construction: 1980
Josting EFS 2600 Josting EFS 2600 2600 mm
veneer guillotine
part Id-no.: 2240971
year of construction: 1966
Schneider SK 2/4 II Schneider SK 2/4 II 820 x 1150 mm
spindle moulder
part Id-no.: 2237862

Hebrock AKV 2001 DK Hebrock AKV 2001 DK - 5 mm
edge banding machine
part Id-no.: 2234804
year of construction: 1993
BECKER KVT 2.100 BECKER KVT 2.100 100 m³/h
AGGREGAT
part Id-no.: 2232465
year of construction: 1995
BECKER KVT 2.100 BECKER KVT 2.100 100 m³/h
AGGREGAT
part Id-no.: 2232464
year of construction: 1994
Homag KL 10/08/QA/S Homag KL 10/08/QA/S - 3 mm, Fügen
edge banding machine
part Id-no.: 2230527
year of construction: 1997
Homag TD 32/20/08 Homag TD 32/20/08 längs/quer
lathing transfer
part Id-no.: 2229490
year of construction: 1994
Festo PPS Festo PPS
chain mortiser
part Id-no.: 2192010

Brandt KTV51 Brandt KTV51 - 2,5 mm
edge banding machine
part Id-no.: 2189750
year of construction: 1998
Homag FKR 79/05/QA Homag FKR 79/05/QA - 14 mm, Fügen
edge banding machine
part Id-no.: 2189412
year of construction: 1992
Spehoma SP 201.1 Spehoma SP 201.1 angetrieben 2000 x 4300 mm
roller conveyor
part Id-no.: 2186216
year of construction: 1986
Brandt KD 67 C Brandt KD 67 C
edge banding machine
part Id-no.: 2178021
year of construction: 2000
Bargstedt TBH 22 Bargstedt TBH 22
feeding
part Id-no.: 2177509
year of construction: 1994
Josting KLM 2800 Josting KLM 2800
transport belt
part Id-no.: 2174446

Hymmen KLM 2800 Hymmen KLM 2800
glue spreading machine
part Id-no.: 2161266
year of construction: 1974
Homag KL20/15/QA Homag KL20/15/QA
edge banding machine
part Id-no.: 2159995
year of construction: 1994
Homag KL 77/QA Homag KL 77/QA - 12 mm
edge banding machine
part Id-no.: 2147821
year of construction: 1992
Holzma HCL 11/43/22 Holzma HCL 11/43/22 - 4300 mm
panel saw
part Id-no.: 2081526
year of construction: 2007
Homag FKR 79/09/ Homag FKR 79/09/
edge banding machine
part Id-no.: 2081208
year of construction: 1990
Hymmen KLM Hymmen KLM
glue spreading machine
part Id-no.: 2080491
year of construction: 1980
Bargstedt TSK15/D/25 Bargstedt TSK15/D/25
transfer
part Id-no.: 2080106

Homag KL77/A20/S Homag KL77/A20/S
edge banding machine
part Id-no.: 2078252
year of construction: 1999
Viewed