Immediately to the press, without extra work.
End splicing and trimming in a single step. Nothing could be easier. With the KUPER EVB. The operator enters the desired finished veneer dimension here at the touch panel, adjustment of the gluing heads is motor-driven. Use either adhesive tape or KUPER glue thread for end splicing. The veneer guide and the use of block-drum knives guarantee an outstanding trim cut. Kuper exact.
Spliced and trimmed veneer sheets can be stacked precisely via the stacker. You have a perfect unit for the complete processing operation: The KUPER EVB end splicing and trimming unit can be combined with the CRC crossfeed veneer splicing machine. The KUPER EVB can also be purchased as a stand-along machine with or without the stacking system.
KUPERPOWER for your business.
Advantages at a glance
- Sturdy due to solid steel stand construction
- Motor-driven width adjustment
- Indication of cutting position with laser (for the stand-alone machine)
- High precision also with big veneer dimensions
- High feed speed
- Compatible with the KUPER CRC and with their stacking system
The reinforced veneer decks are trimmed neatly and precisely even with very long and narrow layon dimensions.
|Working width||1,600/2,800/3,200/3,600 mm|
|Min. working width in the grain||approx. 400 mm|
|Min. working width across the grain||approx. 300 mm|
|Feed speed||up to 40 m/min.|
|Veneer thickness||approx. 0.3 – 2.5 mm|
|Veneer cut-off||min. ca. 10 mm|
max. 300 mm
|Operating voltage||400 V, 3 Ph + PE, 50 Hz, or special voltage|
|Total connected load||approx. 3.8 – 9.3 kVA (glue thread heads)|
approx. 2.8 – 8.3 kVA (adhesive tape heads)
|Technical data of EVB working in line with a KUPER CRC may vary.|
Additional technical data upon request. Illustrations may contain options. Additional components such as control cabinets, safety facilities e.g. are maybe not shown. Subject to design modification.
Do you have any questions?
- Klaus Schlütermann
- +49 52 44/9 84 - 3 42